Mon–Sun: 7 AM–11 PM(214) 286-6733
Balch Springs ConcreteBalch Springs Concrete

Concrete Contractor in Seagoville, TX - Level Driveways, Patios and Slabs

Balch Springs Concrete is a concrete contractor working in Seagoville, TX. We pour driveways, patios, walks and garage floors for homeowners, and slabs and footings for builders and property owners across the city.

Covered stamped-concrete patio with tan patterned surface, curved reddish steps and a low stone retaining wall.
Wide tiled concrete steps with brown edges lead to a wood front door framed by stone walls.

What Seagoville jobs usually look like

The calls we get from Seagoville mostly come from homeowners. It might be a driveway that has cracked across the middle or sunk where it meets the street, a back patio that holds water after a rain, a walk that's started to tip, or a slab for a new shed out back. Builders and property owners call us here for slabs and footings too, the same work we do back home in Balch Springs and over in Mesquite.

I can see the cracks at the estimate, but the subgrade, the dirt and base the slab sits on, only shows once the old concrete is out. That's usually where sinking starts, so our plan here begins below the slab with digging out what's soft and packing a firm base, and I'll tell you up front what I can't know until it's open.

The concrete work we do in Seagoville

Working in Seagoville: permits, price and timing

Seagoville has its own Building Inspection Department, the office that issues construction permits and enforces the city's codes, and the city's permitting staff handle contractor registration along with permit applications. I check with the city on each job, and when the work needs a permit, we file it, book the inspections and tie the pour date to them, so the inspection calendar can set your start date as much as ours does. We're licensed and insured, and since registration and permits run through the same city office, it's fair to ask any contractor you're weighing how they'll handle both.

The price moves with the size of the slab, how much old concrete has to come out, how much base the job needs, how thick it has to be for what it carries, and the finish you pick. Timing turns on the permit when there is one and on curing, the days new concrete needs to harden before you walk on it and longer before you drive on it. I walk the job, measure it and write down what the price covers, the same way we do in Heartland and Forney.

  • Permit question first, pour date second, because when a job needs inspections the pour is tied to them.
  • Old base gets dug out and packed, not raked level, because a slab on loose dirt settles with it.
  • Every slab slopes away from the house, and I check where the water runs before the forms go in.
  • Joints get cut on time, so the cracks concrete makes land in the lines we picked.
  • When a budget gets tight, I'd cut a fancy finish before I'd cut the base, because the base is buried on day one and still decides how the slab holds up.

Get a free on-site estimate for your Seagoville concrete job

Send the form with what you need poured or replaced, and we'll reply within one business day to set a time. I come out myself to walk the job and measure it, then write down what the price covers. The estimate is free, and there's no obligation.

(214) 286-6733

Seagoville concrete questions we hear

Do I need a permit to replace a concrete driveway in Seagoville?

Ask the city before the pour, because its guidance doesn't settle driveways either way. The city issues permits for construction and other property improvements, and the work it says needs no permit is cosmetic, like painting, carpet and trim. When you're unsure, the city says to call the Building Inspections Department at 972-287-6829, and we check with them on every job we take.

Does a retaining wall need a permit in Seagoville?

Yes, the city says all retaining walls need a permit. A wall over 48 inches tall also needs engineered plans and design, so on a taller wall the engineering comes before we set any forms.

Do I need a permit for a slab under a storage shed in Seagoville?

Plan on one, because the city says any accessory or storage building needs a permit. We size the slab to the shed you've picked and set the pour date around what the city asks for.

What building codes does Seagoville use for construction?

The city uses the International Code Council family of codes with its own amendments, and it enforces city and state codes for all buildings and structures. Those codes cover construction, alteration, repair, demolition and maintenance, and the inspections we book check the work against them.

Service areas

We're a concrete contractor based in Balch Springs, TX, and Seagoville is one of the cities we work in around it. The cities below have their own page, and if yours isn't listed, give us a call and ask.

Call us about your Seagoville slab

We answer (214) 286-6733 seven days a week from 7 AM to 11 PM, so you can call after work, or send the form whenever it suits you.

If you're still deciding what to pour or replace in Seagoville, send a note and I'll walk you through it.

Tell us about your project
(214) 286-6733Get an estimate